Unable to ping GNS3 router with laptop feedback

[L0nely]

<p>Hi! I have a simple setup with a single router with an ip address of 192.168.10.1 connected to the cloud via a laptop loop. The loopback on my laptop was created using the loopback manager. The IP address of my feedback is 192.168.10.100 with the default gateway 192.168.10.1.<br><br><br>Yesterday I was able to ping between the loop and the router and it was successful. Today, for some reason, I can't ping from both sides. I didn't change anything in my topology, it just stopped ringing.<br><br><br>Firewalls and antivirus programs are disabled. This is a screenshot of my topology, as well as the IP address of my loopback, as well as the running configuration on my router.<br></p>

[AngelaJohnston]

I have exactly the same problem, only my router is broken. Can someone recommend a good router?

[FaithMillsM2V]

<p>

I have exactly the same problem, only my router is broken. Can someone recommend a good router?

<br></p><p>
I would recommend the DIR-882. This is a great router from the well-known company D-link. A couple of months ago, I also faced the same problem as you, and could not find a suitable router that would meet the criteria for price and quality. I decided to take the router that I described above. As I said, the main criterion for me was the performance of the router and the built-in dual-band wireless connection at 2.4 GHz helped me to make sure of this, which made the router much faster and stronger than the routers of competitors. Also, if you do not like my choice, then you can go to the article, which describes in more detail all the brands that make good routers. https://19216811ip.host/default-router-passwords <a class="in-cell-link" target="_blank" href="https://19216811ip.host/default-router-passwords"></a><!--EndFragment-->

<br></p>