08-17-2019, 05:15 PM
HOW TO SETUP ANY VAPE KIT!
Hey everyone! Today we wanted to show you how to setup ANY vape kit that you get! After years of trying out tons of different mods and tanks, I’ve noticed companies have almost all gone to a universal layout making it easy for anyone to pick up a new vape and get it going. We’ll go over everything from setting up your tank, using the device, and charging!
The Tank
The first thing to do with any kit is get your tank ready, that way when everything is setup you’ll be ready to vape!
The first thing to do when you take your tank out of the box is to make sure the coil is secure. First take your tank apart by unscrewing the base, then unscrew your coil, and screw it back in. If your tank uses pressfit coils, then the process is even easier! (This is also the same process you’ll follow when replacing your coil in the future!) Now that you know your coil is making good contact, reassemble the tank, and begin the filling process.
The most common filling styles are twist-off caps, and sliding caps, however there are some tanks that are more unique with twisting caps that reveal ports, pull caps, etc.! On all tanks you need to avoid putting juice down the center chimney because that’s where the vapor is travelling from, if you do you’ll get a mouthful of juice and juice leaking from your airflow slots!
Now that your tank is filled with a brand new coil, you’re going to want to let the coil soak for 5-10 minutes to make sure that the cotton inside is saturated so it won’t get burnt when you fire it! After your first fill on a new coil, you won’t need to wait more than 30 seconds to start vaping.
The Device
You’re almost ready! Setting up your mod can seem very intimidating, especially when they’re packed with lots of features. Most settings on your vape won’t need to be changed, and features like temperature control aren’t even used by most as they require more fine tuning and specific wire to work correctly. Now let’s get started!
Hey everyone! Today we wanted to show you how to setup ANY vape kit that you get! After years of trying out tons of different mods and tanks, I’ve noticed companies have almost all gone to a universal layout making it easy for anyone to pick up a new vape and get it going. We’ll go over everything from setting up your tank, using the device, and charging!
The Tank
The first thing to do with any kit is get your tank ready, that way when everything is setup you’ll be ready to vape!
The first thing to do when you take your tank out of the box is to make sure the coil is secure. First take your tank apart by unscrewing the base, then unscrew your coil, and screw it back in. If your tank uses pressfit coils, then the process is even easier! (This is also the same process you’ll follow when replacing your coil in the future!) Now that you know your coil is making good contact, reassemble the tank, and begin the filling process.
The most common filling styles are twist-off caps, and sliding caps, however there are some tanks that are more unique with twisting caps that reveal ports, pull caps, etc.! On all tanks you need to avoid putting juice down the center chimney because that’s where the vapor is travelling from, if you do you’ll get a mouthful of juice and juice leaking from your airflow slots!
Now that your tank is filled with a brand new coil, you’re going to want to let the coil soak for 5-10 minutes to make sure that the cotton inside is saturated so it won’t get burnt when you fire it! After your first fill on a new coil, you won’t need to wait more than 30 seconds to start vaping.
The Device
You’re almost ready! Setting up your mod can seem very intimidating, especially when they’re packed with lots of features. Most settings on your vape won’t need to be changed, and features like temperature control aren’t even used by most as they require more fine tuning and specific wire to work correctly. Now let’s get started!