09-18-2019, 05:10 PM
The finished products produced by the jaw crusher include stone Construction Waste Crusher and artificial sand, so it is also called ore. It is equivalent to the combination of stone and sand. In raw materials factories such as road construction and construction, ore materials are often required for supply, and ore materials equipment can meet the requirements for simultaneous production of stone materials and artificial sand. So what is the price of the jaw crusher for processing ore?
We have developed and produced vibrating feeders, jaw crushers, hydraulic cone crushers, circular vibrating screens, etc., which are used for crushing treatment, which is convenient for use in some fields, and the use of this equipment can greatly improve work efficiency. The processing flow is as follows: the stone material is blasted from the mountain, and the stone material of less than 1020 mm is sent to the vibrating feeder through the dump truck. The vibrating feeder sends the stone material uniformly into the jaw crusher, and the jaw crusher breaks the stone material. After crushing and crushing the stone material is about 150mm--300mm, the material is sent to the hydraulic cone crusher through the vibrating feeder for two-stage crushing. The crushed material is sieved by circular vibration screening, and the material larger than 40mm is returned again. The cone is broken and broken, and the material below 40mm is sent to the shaping machine by the belt conveyor. The finished product is sieved by circular vibration and conveyed by the belt conveyor to the finished product area.
We have developed and produced vibrating feeders, jaw crushers, hydraulic cone crushers, circular vibrating screens, etc., which are used for crushing treatment, which is convenient for use in some fields, and the use of this equipment can greatly improve work efficiency. The processing flow is as follows: the stone material is blasted from the mountain, and the stone material of less than 1020 mm is sent to the vibrating feeder through the dump truck. The vibrating feeder sends the stone material uniformly into the jaw crusher, and the jaw crusher breaks the stone material. After crushing and crushing the stone material is about 150mm--300mm, the material is sent to the hydraulic cone crusher through the vibrating feeder for two-stage crushing. The crushed material is sieved by circular vibration screening, and the material larger than 40mm is returned again. The cone is broken and broken, and the material below 40mm is sent to the shaping machine by the belt conveyor. The finished product is sieved by circular vibration and conveyed by the belt conveyor to the finished product area.